| 

Search

COPYRIGHT © SHENZHEN V-GOOD TECHNOLOGY CO., LTD.  ALL RIGHTS RESERVED 粤ICP备15012198号      Powered by www.300.cn

>
other


V-Good RC launched new programming card for its Firefly series ARM 32bit ESC. The purpose we launched the programming card is to expand more ESC’s preset functions, to meet more personalized needs of the users and make it more convenient for the users to program the settings for the ESCs.
Currently we divided the programming card’s functions into 6 major parts.
1. Flight Mode choice. For example: common single track and 3D flight mode.
2. ESC input throttle signal choice. For example: common remote control signal or One-shot signal.
3. Motor PWM frequency choice.
4. Active brake setting.
5. Motor timing choice.
6. Motor direction choice.

To program the settings is very easy. we just need to insert the mini jumper into the default port of the corresponding functions, connect the ESC signal cable and power up the battery, then the programming is finished and succeed

Programming card

Prog Card for Firefly series ESC


USB adapter can set the parameters for all V-Good multicopter ESCs.  It’s easily to set all of the ESC parameters.
Use USB adapter connect the ESC to the PC, flash ESC with new firmwareonline and configure the pricise settings.

USB adapter

USB Adapter

JAGGER Programming card


With the programming card, you can adjust various settings of the ESC. A special feature is to adjust the two type of Lithium batteries cutoff voltage accurately. Also you can adjust timing,different brake modes and governor speed by selection buttons.Present settings can be read back from ESC with the LED display.Also you can connect PC with the USB port to upgrade the ESC firmware and set with the fine settings.

USB Adapter

X-4212HV 1520us/333

X-3185HV 1520us/333

X-1138THV 760us/333

SERVO

PROGRAM CARD

X-4212HV 1520us/333

X-3185HV 1520us/333

X-1138THV 760us/333